Prof. Lab Resin ABS-like, green

Prof. Lab Resin ABS-like, green

Prof. Lab Resin ABS-like, green is a specially developed resin for 3D printing on LCD/UV (MSLA) printers that combines higher toughness and durability with fine print details. Thanks to its mechanical properties, it is similar to ABS plastic – prints are less brittle than with standard resins and better withstand impacts and bending.

The opaque green shade is ideal for prototypes, technical parts, figurines, and models where you need clearly readable details and a good base for further surface finishing (filling, sanding, varnishing, painting).

Key features

• ABS-like mechanical properties – higher toughness, less brittle prints than with standard resin
• High accuracy and detail – sharp edges, fine structures, suitable for technical parts and figurines
• Green color – clearly readable details, suitable for visual inspection of the model and subsequent painting
• Compatible with common LCD/UV printers (405 nm)
• Lower shrinkage than classic hard resins – better dimensional accuracy
• Good impact resistance within the ABS-like resin category
• Suitable for prototyping, mechanical parts with mild stress, enclosures, holders, mock-ups, and models

Recommended use

Prof. Lab Resin ABS-like, green is suitable for:

• functional prototypes and test parts
• small technical components, holders, covers, and jigs
• models and figurines with fine details
• parts that require better impact resistance than common standard resin

For maximum strength and durability, we recommend thorough curing in a UV chamber after cleaning the print in isopropyl alcohol or a suitable cleaning solution.

Technical parameters

The listed values are typical for the category of ABS-like resins intended for 405 nm LCD printers. Specific settings may vary slightly depending on the printer type and printing conditions.

• Material type: ABS-like photopolymer resin
• Color: green (opaque)
• Designed for printers: LCD / MSLA / DLP with UV LED 405 nm
• Recommended wavelength: 405 nm
• Recommended exposure times:
  • bottom layers: 25–40 s (depending on display power)
  • normal layers: 1.8–3.0 s (depending on layer height and printer)
• Recommended layer height: 0.025–0.1 mm
• Hardness (Shore D): approx. 75–85 (typical for ABS-like resins)
• Viscosity: medium (typically 150–300 mPa·s at 25 °C)
• Shrinkage during curing: low, suitable for dimensionally accurate parts
• Ambient printing temperature: 20–28 °C
• Recommended print cleaning: isopropyl alcohol (IPA) or a dedicated resin cleaning solution
• Recommended final curing: UV lamp / UV chamber, 5–15 min depending on model thickness
• Packaging: bottle (typically 0.5–1 l)

Safety and storage

• When working, use gloves and eye protection, avoid direct skin contact
• Work in a well-ventilated area
• Do not expose to direct sunlight, store in a dark and dry place at room temperature
• Keep out of reach of children and pets

Tips for successful printing

• Shake the bottle well before each use so the fillers and pigment mix evenly
• When switching from another resin, we recommend cleaning the vat and FEP film
• To achieve optimal results, perform a short test print and fine-tune the exposure times
• After printing, let the model drain back into the vat, then clean it in IPA/cleaning solution

This green ABS-like Prof. Lab resin is an excellent choice for users looking for a compromise between durability, level of detail, and easy processing in resin 3D printing.

Key features:

• ABS-like resin with higher toughness and impact resistance than standard resins
• High accuracy and fine details for technical models, figurines, and prototypes
• Opaque green shade for good detail visibility and easy painting
• Compatible with common LCD/UV/MSLA 3D printers (405 nm)
• Lower shrinkage and better dimensional accuracy of prints
• Ideal for functional prototypes, small mechanical parts, holders, covers, and visual models
• Easy post-processing – sanding, drilling, varnishing, painting